Line 6 Spider Iii 15 Modeling Guitar Amplifier 15 Watt "cable jack broken amp" Questions

Ad

...cable which allows unscrewing the jack, take it apart and look for a loose / broken connection. Repair would be to solder it back. If the jacks on the cord are the molded type, the most practical ...

Ad

...cable and jack sideways breaking it or the solder where it attaches to the circuitry. To avoid the problem, loop your cable through the handle of the amp so when cable is yanked it doesn't yank the ...

Ad

...cable can often be repaired by soldering the wires back onto the plug.) If that doesn't help, it's possible the input jack on your amp was damaged. It is a relatively simple job for an amp technician ...

Question about Line 6 Music

1 Answer

cable broke off in the input jack The tip of one of my cables broke off in the guitar input. amp works just fine but cables don't plug in all the way I'm pretty sure t6hat the output jack is a sealed ...

Question about Roland Music

2 Answers

...jack MAY actually be broken. It will need to be serviced. Run cables through the handle to avoid plugs from being yanked sideways and breaking the jacks. We had the same problem and notice that the ...

Question about Fender Music

1 Answer

...cable... I have seen some try to use speaker cables or junky 1/4 inch cables intended for home stereo... these will NOT work and can cause the feedback. The next possibility is a broken jack on the ...

...cable it would mean that your input jack in your amp has a broken ground connection. Hope this helps. Also make sure you are using an INSTRUMENT cable and NOT a speaker extension cable. The cable ...

Question about Ibanez Music

1 Answer

cable into the IN jack. Pushed the pedal, no light, no sound nothing. Oddly enough when I reversed the cables (opposite of Instructions) The RED light did come on but still no sound. Any thoughts? The

...jack. Also there is a capacitor C60 that is for RF bypassing and if that shorts that will kill the audio. Yes, inout jacks get destroyed by tripping over guitar cables... that is why you run the cord ...

jack is making contact with a cable. I do think you should test it with another guitar and another cable but if that is not solving the problem then I bet it's a problem with the input jack of the amo

Not finding what you are looking for?
Line 6 Spider Iii 15 Modeling Guitar Amplifier 15 Watt Logo

91 questions posted

Ask a Question

Usually answered in minutes!

Top Line 6 Music Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Line 6 Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...