Question about Behringer Music
my Behringer 2500 wat pa amp keeps getting hot and cutting off Step 1:Overheating is typically caused by poor ventilation. The best thing is to make sure that you -- Step 2:have plenty of space ...
Question about Hartke Music
...lost trying to replace Well, hope this helps you. Fuse Requirements: USA @ 120 Volts /60 HZ - 10 Amps, 5 x 20 mm GMC/T/slow blow Europe @ 240 Volts/50 Hz - 5 Amps, 5 x 20 mm GMC/T/slow blow Japan
power cord get really hot. If mixer is working properly, check the rating of the adapter versus what the unit requires. Some sites indicate this requires a 12 volt adapter rated at 1.2 amps.
Question about Phonic Music
trying to get my phonic helixboard 12 mk II to link up too my vista laptop via firewire Here is the system requirements cut and pasted from manual: ? Microsoft���&
Question about Music
amps or watts to the minimum required should provide years of trouble free service. Example: 9VDC at 50 watts should be supplied by a 9VDC 62 watts or even 75 watts; or in the case of a rating of 9VDC
amp 5050 rmx stay in clip mode Disconnect speakers. With NO input, if clip light remains on, take in for repair as there is an internal failure. If reducing the gain and loudness keeps the clip off, ...
ampage for 9-volt alesis sr-16 drum machine adapter Here is a link to a discussion about this that will help:http://www.soundonsound.com/forum/showflat.php?Cat=&Number=679914&Main=679565 A 9 ...
when I turn on the amp, I get a loud hum. plugging into the jack doesn't change anything. turning the dials doesn't change anything. when I turn off the amp it makes a loud crack. i) Disconnect one ...
...The limiter, if you leave it on, might help protect your speakers when powering on. Most good power amps have circuitry to disconnect the speakers while amplifier is powering up and becoming stable, ...
91 questions posted
Usually answered in minutes!
39 Questions
20 Questions
11 Questions