Mitsubishi WD-60735 Projection Television "lamp door interlock" Questions

Ad

Question about Mitsubishi WD Televison & Video

1 Answer

...lamp door interlock switch is off or malfunction. green blinking: set is initializing, about to begin normal operation. So: quite possible that lamp has been replaced incorrectly or door is not tight ...

Ad

Question about Mitsubishi WD Televison & Video

1 Answer

...lamp properly and put the door back so the interlock switch is functioning. Sometimes installing the lamp will get slightly displaced and is not plugged up properly and will indicate a lamp blinking ...

Ad

Question about Mitsubishi WD Televison & Video

2 Answers

...lamp door interlock switch Look at some of the other posts for a similar problem. Check the power PWB for bulging electrolytic capacitors. I had a very similar problem and that fixed the TV problem. ...

Question about Mitsubishi WD Televison & Video

1 Answer

...door off of the lamp compartment and closed the interlock switch to see if the lamp was coming on. It was coming on ,but only for about 10 seconds. Then I would get a 34 code. Could anyone help with ...

Question about Mitsubishi WD Televison & Video

1 Answer

...intermittent no start, and short lamp life. Also, make sure that the lamp door is properly installed because there is an interlock switch which will open if the door is not aligned properly. ...

Question about Mitsubishi WD Televison & Video

1 Answer

...first thing to try is to reclose the access door to the lamp area. There are interlocks there that may be marginally connected. Try to reclose all access doors and report the results here. Thanks, ...

Question about Mitsubishi WD Televison & Video

1 Answer

can turn it back on with picture and sound working fine. This happens once a day at least. Any suggestions would be helpful. My tv model is a Mitsubishi WD-65733. check your lamp door interlock switch

Question about Mitsubishi WD Televison & Video

2 Answers

...lamp and inspect the switch in the vicinity of the door for problems. Be very careful reassembling the unit once the door is removed. The interlock swich must be positioned correctly or you will get ...

...lamp door -> lamp..Interlock is going to be a swicth engaged by the lamp door that is supose to disable the parts that might give you owies when replacing the lamp. (incase you don't uplugg the tv ...

Question about Mitsubishi WD Televison & Video

1 Answer

...lamp door. There is an interlock there wwhich prevents the set from functioning if the door is open. It is easy to misalign the dorr enough to prevent the interlock from closing properly. This will ...

Not finding what you are looking for?
Mitsubishi WD-60735 Projection Television Logo

338 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...