Samsung HT-Z310T Theater System "home receiver fan" Questions

...home theater receiver Occassionally, when I turn on the HT, there's a loud whirring noise, similar to a spinning tray. To stop the noise, I have to turn it off and then on, or I tap the receiver. ...

...receiver has fan lock problem receiver sa-ht05 has fan lock problem have tried turning mains on and off still same problem, is there any other way of resetting unit Perhaps a look at the fan might ...

...home theater surround sound system started smoking and produced a strong odor of burning plastic. I noticed that the fan at the back of the unit had stopped, leading me to believe it is the problem. ...

...home theater system shuts of within 5 secondse say googbuy and protected. i disconect all speakers and same problem, after that i check fan in the back of the receiver and disconect the fan als and ...

...fan working if the receiver is in a very enclosed place that warms up and is not ventilated it will cause the problem. The solution is to provide more ventilation so that the receiver can cool itself ...

...Fan My RCA receiver, model # RT2870, Has a grinding cooling fan. When I turn the unit on it makes this noise for about 20 mins then will slowly go away. It is very annoying so I'd appreciate if I ...

...I do? F-61 came up on a panasonic home theater system i once owned and switched off. it turned out to be a faulty cooling fan at the rear of the receiver. once replaced all was well. hope this

home cinema Panasonic SA-HT870. I checked speakers (corect), Checked fan (corect). what can i do, for problem F61. when i turn on, it's seems like a blow up, deep tones on my sub (zzzzzz), and after 3

...home dvd/cd receiver has pt fan error wen i turn the power on its give me error pt fan error not working you must repair it. please inspect if fans comes up with power on. sometimes feedback wire ...

...is a w96 model if that helps My wireless receiver had the blue light flashing i observe that the fan was not spinning i removed the fan press the dp key and the reset switch and now its ...