Viking VDSC305-4B Dual Fuel (Electric and Gas) Kitchen Range "range gas valve" Questions

...gas go to the range kenmore gas stove model 665 75022101 First, check to make sure gas is actually getting to the range and hasn't been stopped by a clog or simply shut off accidentally. Next, make ...

...gas range burner does not light gas valve does not work It is likely that the ignitor needs to be replaced. If the range does not sense the correct amount of resistance in the ignitor, the range will ...

...gas range - new ignitor is not getting hot I have a whirlpool gas range - new ignitor is receiving 120volts from the power side and shows 120volts to one terminal at the gas valve. The ignitor is not ...

Gas Range Oven not lighting Broiler lights but Oven does not. The lighting coil gets just as Red just as quickly on both. Some interlock keeping the gas from flowing? In many cases, even if the ...

...gas range oven.i installed a new ignitor on the oven still will not work.I tested the new ignitor by switching it with the broiler ignitor and it worked fine.I suspect the gas valve is faulty as i ...

...to feed gas to the ignitor. an appliance parts store will have the oven gas valve; it just screws into place. be sure to turn off the gas and, remove power to the range before you do any work on

...gas range, jgb282set1ss, gas control valve, #WB19K10043, what happens if the gas control valve got over pressurized? we replace the line regulator, got gas on the in put of range control valve, but ...

...gas range. Oven glow coil comes on but has no gas to heat? My Roper Gas Range Model # FGP33560 Serial # RH 3310535 has a glow coil in the oven. The glow coil comes on but it is not heating. Is it the ...

...gas valve. No voltage measured at neutral terminal of gas valve. Continuity test between line and neutral terminals of gas valve shows no continuity. Has the gas valve failed? yes bi metal inside ...

...gas range KGSA906PSS. The oven keeps on leaking gas when the oven is off. The person who installed it did a leak test at the gas valve and that was fine. What do I need to do to fix this? ...