Why can't I connect my corporate Cisco IP Phone 7941 to a switch? I can connect a switch to Cisco phone switch and connect multiple devices. But the phone will only work when connected directly to the
Question about Cisco Computers & Internet
...What can I do to get it back on? Please. Is the phone connected to a POW (Power Over Ethernet)Cisco Switch? Check the model number of the switch with the Cisco web site www.cisco.com Have you check ...
how power need Cisco 7941G-GE IP Phone These phones can take their power from a Power over Ethernet switch, where all you need to do is plug the phone in to the switch and it gets its power from there
Question about Nortel Computers & Internet
Nortel IP phone 1220 - LED indicator not switching off The LED indictor at the top (Red colour Light) which indicates for incoming call/msg is continuously glowing and i am unable to switch it off. i ...
...have the whole system An Avaya Technican informed me that you will have to reset the entire phone switch by power cycling them down. 1st Unplug the power from the Base Device, then all the switches ...
...phones I have two mitel 5212 phones that I need to swap. do I need to swap mac addresses in the switch? Can't find the option on the phone or in the switch Depends on what type of phone switch
Mitel 5220 Electronic hook Switch? Is there an Electronic Hook Switch for the Mitel5220 or is a handset lifter the only way? Thanks Nigel The only electronic hook switch that I know about is on the ...
Inline power problem: cisco ip phone 7941G Hi, I am using seven 7941G IP Phones on Catalyst 3750G switch. The problem is that three of my ip phones are not powering up after replugging the ethernet ...
...ip address for powerconnect 5212 Dell powerconnect 5212 You must assign an IP address to the switch to gain management access over the network. You may also need to a establish a default ...
...cisco ip phone does not start Confirm if the Phone has power supply. and If it's connected to a POE switch confirm that it connects to the Switch port on the phone. Yes, if you are using a Cisco ...
162 questions posted
Usually answered in minutes!
101 Questions
92 Questions
36 Questions
41 Questions
28 Questions