Nortel 2550T 48-Port Ethernet Switch (AL2515E02-E6) "configuration" Questions

How to clean up configuration Huawei switch ? I use the switch Huawei S9306 in my network. [Y/N]:y reboot Warning: All the configuration will be saved to the configuration file for the n ext startup:,

...3. If the Setup Wizard CD-ROM from Step 2 fails to configure your router, you may need a manual configuration. While plugged into the provider modem unit and able to get online (Step 1), visit ...

hi dear how to configure d-link switch you have an... Hi dear how to configure d-link switch you have any idea Hi this D-Link DES-1008D switch is unmanaged switch. This cannot be configured. This is ...

...issue with a Cisco switch, I'd tell you that after you change the IP address you need to save your configuration to NVRAM using the "copy run start" command. A Cisco switch will look to start using ...

my cisco 4503 keeps losing it's configuration file.. any ideas why this is happening? thx. Hi, The case gives me hints towards the configuration register value which is not set to proper value, so the

...Proxy to Support IGMPv3? To configure IGMP snooping proxy to support IGMPv3, perform the following configuration: In the system view: igmp-snooping enableIn the VLAN view: igmp-snooping ...

How to upload ready configuration file into the new switch? New Huawei Quidway S5300 switch: how to upload ready configuration file into the new switch, connected to PC through the console port? I ...