LG WM0742H Front Load Washer "water pressure washers" Questions

water level pressure switch. As the machine fills, the pressure increases on the switch, at the set pressure, the switch cuts power to the water inlet valve and the water stops flowing into the washer

...and run water into a bucket to test the pressure and flow of the water. If all of these check out and you have good water pressure and flow to the machine, you should replace the water inlet

...is air leakage in the line of pressure switch. so water level rises to higher level to make required pressure. as water is more in your washer it won't drain properly. the sound is that of air

...and run water into a bucket to test the pressure and flow of the water. If all of these check out and you have good water pressure and flow to the machine, you should replace the water inlet

water pressure code. we had the pressure checked at the hot and cold cutoffs and the water pressure was normal says the plumber @ 80 psi. We checked the intake filters and even removed the little grey

...connect to the washer (both hot and cold) were clogged with debris--thus reducing the water pressure in the machine. Good water pressure is needed to "flush out" the detergent, etc. from the

...it on. Concerned that door popped open. Is there a part I need to buy for that or did water pressure pop it open? Try new water valve first. See if that does it. Water pressure could force door

water pressure, turn the water back off and remove the strainer that should be in one end of the hose. Inspect the strainer to see if it is stopped up, clean it and reinstall it. Now repeat this test.

...water pressure checked, still not enough water to get the clothes clean. Any ideas? PRESSURE SWITCH Your pressure switch stops the water and allows it to start the next cycle. It's a switch either in ...

...water overfills Check that the pressure switch tube is connected to pressure switch. Check that the water inlet valve is not stuck open. To check start washer, turn washer off, if water continues to ...