Ariston Technologies Ariston AWD12 Front Load Washer/Dryer "overload motor" Questions

motor overload protector kicks in. This would also make sense that it started happening in the Spin cycle when the motor draws the highest voltage. Sometimes it's only the overload protector that goes

current trip occurs if there is a current spike of 26 amps instantly at the motor windings in which the motor overload trips. check bearings for lubrication - or as stated above overloading the washer

...overload is sensed, the motor stops immediately and then proceeds to the next water-flow action. If the stopping of the motor working is happens in one direction ten times, "8E" Error is displayed. - ...

...cycles are missed/bypassed. sounds like the motor could be cutting out on overload possibly motor has built in overload check this first if cutting out possible faulty bearings in motor replace ...

MOTOR HAS AN OVERLOAD ON IT THAT WILL TRIP IF THE MOTOR GETS TOO HOT OR PULLS TOO MUCH CURRENT. IT SOUNDS LIKE IT GOT TOO HOT FOR SOME REASON. IF THE MACHINE WAS OVERLOADED ON EACH WASH LOAD, IT COULD

motor overload This seems to be a fault in the motor wiring harness, check all the connectors to and from the motor, check the male and female connectors. Also check the sensors to the motor which can

...overload is sensed, the motor stops working at once and then feeds back to the initial stage of the dehydration unbalance sensing. When the feed back has occcurred twice, Error ?8E? is displayed ...

...Overload On Motor. How can I fix this by meself? I had the same problem. I thought it was the motor it turned out I had a nickle wedged in the filter (bottom left behind panel) the nickle blocked the ...

...motor overload. Just replaced bearings and seal, put back together and now have an LE code (motor overload). Drum spins great! But maybe when replacing the stator and rotor could I have something to ...

...overload is sensed, the motor stops working at once and then feeds back to the initial stage of the dehydration unbalance sensing. When the feed back has occcurred twice, Error "8E" is displayed ...