...tube,, mine was always screaching on the rinse spin and finally gave out when it wore the bottom off my tube, went and bought a used tube installed it with a new clutch and works fine now no more ...
...rinse cycle. Maybe a fuse? If so were can the parts be that need to be replaced? Kerbri, it sounds like your pressure switch could be the culprit. Under the top console the switch will be on the left ...
Question about Kenmore Washing Machines
...rinse and spin. It continues to fill and will overflow. Where do I troubleshoot? Check the drain pump and pipe is free of obstruction. Ok, there is a tube running from the fill switch to the tub, as ...
Question about Kenmore Washing Machines
...rinse cycle. I've tried it on different load levels. Small to large and that has so effect. Mod # 20902990 Your wash machine doesn't know that the tub is full. Open up your console and look for a ...
rinse/spin cycle and goes into next wash cycle Take the front panel off by using a putty knife to release the clips at the top of the front panel. Now, take the thin tube off from the left side of the
...rinse and spin and on/off button flashing fast and reduce crease and mini load buttons flashing slow ? check pump/filter/outlet hose for blockages. if ok, check pressure switch (disc shaped item at ...
...rinse cycle and not spin, also had short fills of water. He immediately popped off the front of the washer (insert a putty knife in 2 locations at the top), and showed me there was a plugged up ...
...during the rinse cycle. What would cause this situation? check the outlet tube for cracks or a loose clamp, also make sure the tube is draining in the sink or drain tube and has not slipped
... overflows Water will not shut off during wash or rinse cycle of my Kenmore top loading washing machine the clear tube going from the tub to the pressure switch probably came undone or has a hole in ...
206 questions posted
Usually answered in minutes!
691 Questions
231 Questions
191 Questions
116 Questions