Brush doesnt spin - Brush motor check? So brush doesnt spin. Belt good, roller is clean, can I check voltage when the head is off? Continuity measures? A broken drive belt, damaged brush roll, jammed ...
Question about Hoover Vacuums
hoover windtunnel U5453-900.belt melted put another belt on brush was spinning.Brush spins but not easily.It spins then stops therefore burns the belt.How can i get the brush to spin around better ...
...brushes are not spinning. Took out the spin brush attachment - the main port that the attachment plugs into is not spinning. Is this repairable? Sometimes it can be the inside rod of the brush barrel ...
oreck magnesium keeps shutting off Need to check your brush roller to see if it is spinning. Turn the vacuum over and turn it on. If the brush spins before it shuts off, you may need to check the ...
why is my Shark nv500 vaccum carpet brush is not spinning? The carpet attachment brush is not spinning. The spin brush button when pressed is illuminated. Suction is fine. The brush is free of debris.
the vacuum was working fine then suddenly the main brissels that spin to collect the dirt stopped spinning, the vacuum still has suction but barely picks anything up because the brissels are not ...
Got Dirt Devil Featherlite,keeps burning the belt out immediately and there is only one way to put the belt on...have put on 4 new belts.....what up? Hi There, When a belt breaks immediately after ...
Question about Hoover Vacuums
brushes are still not spinning, a replacement brush-block assembly may be needed. The brushes counter rotate and need each other to spin. If a single brush is falling out, the brush assembly is broken
Eats belts immediately Belt is immediately sheered through by "motor arm" (not sure what to call it - just the opposite of the roller brush end). Motor arm is rough and sheers though the belts ...
635 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions