...brush /head. Did you happen to smell burning rubber at all when the brushes stopped working? Look in your manual for replacing power head/brushes belt! WalMart sells most types or your local vacuum ...
...brush head. You can get a complete replacement brush head for 70 pounds. Hi, I can recommend is to unplug it, turn it over and see if there is anything obstructing the roller brush such as string, ...
...is running ... If the motor (brush head) is running... belt looks good and brush is not seized (or jammed)... You will need to look to the DRIVE PULLEY on the motor OUT-PUT shaft... Hope this ...
...head brush roll will build up hair and thread which travels and winds up at the end of the brush where it`s bearings or bushings are located. You may need to remove the brush roll and the end caps ...
...head is off? Continuity measures? A broken drive belt, damaged brush roll, jammed brush roll bearings, tripped brush roll motor overload, failed brush roll motor or a wiring failure in the wand or ...
...head is not working directly connected to power you have problem with reset switch or power head motor Try to push reset switch several times You have to test hose and wands for continuity and ...
...brush head and now it won't run I followed the manual and videos and replaced a snapped belt I understand that's rare so makes me wonder, but machine is at least 14 years old. It was running but the ...
...brush head. check position of plunger selector. https://www.dyson.co.uk/...is-not.../turbine-head-not-working-properly HI, it's Jim from Crucial Vacuum! If your vacuum has good overall suction, but ...
Question about Electrolux Vacuums
head brush won't turn Renaissance Model: Power Head brush won't turn if it is making a humming sound but not turning you belt is broken, if it is not check the reset switch (little res button) if that
Question about Dyson Vacuums
...good and is not making the turbine head run. Clean the filters/ head and check the hose for blockages 2) The Turbo head has more friction than it should. Remove the brushes from the turbo head and ...
635 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions