Dyson Ball DC24 Bagless Upright Vacuum "turn switch dont" Questions

...upright vacuum brushes dont turn This may be too obvious, but do you have the Carpet switch turned on (bottom left of vac).  Agitator brush does not go around if Floor/Tools is switched

...turn Where is the switch that turns on the brushes when you tilt back the upright portion of the Bissell ProHeat 2X?Belts OK, have turned off and unplugged and replugged it in. No reset of internal ...

...turn it on or off theres a little resistance in the switch and you hear a click, with both of ours the switch moves freely back and forth from on to off, no resisntace, no click, and the machine ...

switch handle to turn it off is not strong enough for its simple task. Does B&D have a proper replacement part? If you can provide a model number, I can check availability of the switch and can either

...turn on at all period.1 of 2 things on/off switch went out or 2 motor burned up but most time u can tell if it is bad motor cause if it smelt like burnt plastic ever bad news its dead but hopefully u ...

turn on. The on/off switch does The machine won't turn on. The on/off switch does not work. This could be a faulty cable or switch, but could also be a faulty motor. The motor also has a built in over

...turn the top screw and rotate til the end of the nozzle comes off. then pull the brushroll out from each side see if the shafts on the transmission are rotating and also check the inside of the ...

...turn. What gives? Check that you dont have anything blocked in the roller, if all is clear there is a little red button on the side off the roller. Push this in and this will reset the roller... If ...

...turn to green like it was reset so wouldnt be showing like I needed to clean filters. I dont want anything to happen so I need to know whats going on so I dont ruin it. It has worked so well....Is ...

...turn, belts are fine , shaft turns fine. how do i check the motor that turns these parts You should be able to hear the motor running when it is switched on. If it doesn't make a noise then it isn't ...