Dyson Ball DC24 Bagless Upright Vacuum "roller motor reset" Questions

Ad

Question about Dyson Vacuums

1 Answer

...roller motor may have burnt out. if it was under a lot of tension or pressure or any moisture that will do it 3. the micro switch which tells the roller motor that the vacuum has been reclined and ...

Ad

...use something small to push the red pin right in, make sure there is nothing blocked in the roller and this should reset the motor. The roller needs to be switched on next to the power button is

Ad

Question about Dyson Vacuums

2 Answers

...motor runs but the brush roller won't turn. I know it isn't my belt because I can see the belt firmly tensioned against the roller and the roller will free spin with my hand. Ther isn't any loose ...

Question about Euro-Pro Vacuums

1 Answer

...turning look on the bottom of the unit for a small reset switch button.I have not worked on this unit but many are similar. If you can hear the roller motor running you may need to replace the ...

motor that controls the suction on one end, and the roller brush on the other end. The Dyson however is different. The DC15 has two motors, one dedicated to suction, the other dedicated to running the

Question about Dyson Vacuums

1 Answer

how do I reset my dyson dc25 Brush roller wont go round You may need a new belt if the brush bar motor is working properly. It could be the switch or brush bar motor if the motor does not run .

...roller going. One possibility is a failing reset button, Another option is a bind causing excessive energy to spin it. This will cause the reset button to trip. Check the bearings in the motor and ...

Question about Electrolux Vacuums

1 Answer

...motor runs, but the roller isn't turning, it's most likely a broken belt. There is the possibility of the motor having burned out, but not likely. A definite diagnosis would need to be made by a ...

...roller motor? If you have power in the wall and power where the cord enters the machine, you have a switch problem. That is the approach I would follow. Find replacement parts at a FixYa.com ...

roller on my LUX4000 starts rolling and then stops but the motor keeps going I replaced the belt and cleaned the unit and then when I start it, the roller operates and after about 10 seconds stops and

Not finding what you are looking for?
Dyson Ball DC24 Bagless Upright Vacuum Logo

860 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...