Dyson Ball DC24 Bagless Upright Vacuum "roller bar switch" Questions

roller bar wont turn. What gives? Check that you dont have anything blocked in the roller, if all is clear there is a little red button on the side off the roller. Push this in and this will reset the

...roller bar doesn't work from first try - and this is my second one I think this must be user error - as I bought a new Dyson DC24 multifloor - attached the bits - but couldn't get roller bar to ...

...roller bar was engaged and I took it to a repair shop and they said it was the roller bar itself. The shop replaced the part and it worked fine for a couple of months and then it started to make the ...

...bar/brush will not damage the wood. You may find these troubleshooting steps helpful: (Quote) If something gets caught in the brush roll, the overload protector shuts off the roller. Lie the vacuum ...

roller will not turn, and belt is in tact, cleaned everything, but not working, please help or my wife will leave now and get a new one. the belt is off the shaft of the motor.. take off bottom of vac

how do I reset my dyson dc25 Brush roller wont go round You may need a new belt if the brush bar motor is working properly. It could be the switch or brush bar motor if the motor does not run .

...when switched on. The roller head may be turning, but something could be rubbing and causing the belt to slip slightly. I'd remove the belt and beater bar and look for foreign material that is ...

...Bar Motor The belt may be stretched or the brush roller may be binding on the bottom plate. Patricia, could be a faulty switch, wire or motor, if you do not hear motor running when switched on. "I ...

Roller bar switch trouble shoot when motor is running You probably need a new switch. Test it with an electrical tester to be sure.

Roller bar will not spin on dc25 animal If the brush bar motor is running try putting on a new belt. If the motor is not running it may be the main switch, the switch that activates when you recline ...