...problems The beater will not turn. I have repeatedly tried pushing the beater on/off button, the reset button, and turned the carpet height knob. No results from any of the actions. Beater ...
...carpet, 7 year old tried and true DC14, wouldn't push across regardless of beater brush on or off. Called Dyson this morning, they suggested removing the small gasket between the floor plate and the ...
...Carpet makes the beater/brush roller much harder to turn than bare floor does, and this can be enough to start a loose belt slipping (after which things don't naturally improve themselves). A. your ...
carpet attachment? You can test the auxiliary plug to the roller/beater attachment with a volt meter if you know how and take precautions. Check for 115-120 volts at the beater/roller attachment plug.
carpet with beater brush My Hoover WindTunnel vacuum no longer contacts the carpet with the beater brush and has very little suction for the carpet. It works fine when I use it with the accessories. I
...beater bar, but the clutch piece appears to drop lower than the indicator line for carpets when extended for normal carpet vaccuuming. The noise is happening intermittently on the carpet setting. Do ...
...carpet' mode Removed beater head plate, cleaned off things wrapped around it (not much), made sure nothing stuck. Replaced plate, noticed beater head hard to rotate by hand, turned on and observed ...
...beater bar is connected to a tiny switch, if that switch is not operating that could be the problem. If the motor is not spinning, that could be your problem (seized), or if you have a broken belt ...
...carpet beater is jammed you will hear a nasty sound and maybe even smell burnt rubber. This is probably a good time to have old faithful serviced and cleaned and a new belt installed. These belts ...
860 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
450 Questions