Dyson Ball DC24 Bagless Upright Vacuum "brush bar making" Questions

brush bar does not turn & makes a loud noise While using the dyson (pet model) it started to make a loud noise. I looked & discovered the brush bar was full of hair! I removed the bottom panel to ...

...brush bar. Two possible faults: Debris (hair etc) caught in brush bar - cut out with knife. Or - damaged drive belt - pieces of belt striking casing. Last, but unlikely cause, debris in bearings of ...

Brush Bar won't turn. I have a Hoover u6485-900 and the brush bar will not turn. I have replaced both belts and bag and it still will not work. There is still suction, but it is picking up very little

brush bar doesn't rotate. Brush bar moves freely by hand and drive belt to motor is intact, but with Vacuum cleaner running the brush bar stays still? First, check to make sure the brush bar is on

...brush bar on/off, the machine can make a ratchet noise if the brush bar become obstructed. Its designed to do this to alert the user that there is something stopping the brush bar turning. We would ...

...brush bar you'll have new brush bar better clean than old brush with new bearing which aren't available or worth the bother fitting, ps keep the filters clean makes a real difference to sucking

...brush bar. I have replaced the brush bar and belt with new ones. No load screaming until using brush bar. Pretty sure its the brush bar motor bearings. Can these be serviced (greased)? Directions on ...

...brush bar is obstructed. We would recommend checking the brush bar and soleplate area and removing any blockages or hairs/threads that are wrapped around the brush bar. Full details on these checks ...

...brush bar (with a coin or a screw driver)compartment and check for blockages near the brush bar and make sure the brush bar spins round freely. Its sounds like the clutch is slipping (it does this to ...

...brush bar has quit working hmmm some of the vacs i see having a brush bar are powered by the vac motor via a belt system or by means of a extra brush bar motor and belt make sure both are replaced ...