Dyson Ball DC24 Bagless Upright Vacuum "belt spinning making" Questions

...spinning on mine even if the flat belt is broken and the v belt loose shouldn't the shafts or something be spinning when I flip it over and turn it on? Nothing is spinning on mine There is a ...

...spinning and you begin to smell burning rubber. Belt not broken. ?????!! belt doesnt have to be broken, check the metal arm on the vacuum, see if there is build up of old rubber from previous belts, ...

spinning, this is the reason why your belt continues to break. If the brush can not spin, the motor shaft will continue to try and spin the belt, but since the brush doesn't spin, and the belt doesn't

...to make sure that the roller is not hindered by a pulled string such from a carpet. Next check the BELT that drives the pulley. If the belt spins a little bit as if the electric motor is working and ...

Eats belts immediately Belt is immediately sheered through by "motor arm" (not sure what to call it - just the opposite of the roller brush end). Motor arm is rough and sheers though the belts ...

My Eurika 4D bagless upright will not pick up anything. The belt is not broke but the roller won't spin and there is verry little to no suction. Still makes all the notice but won't roll as easily You

making a louder noise and I can smell something burning when I use it. I have replaced the belt but this did not help. the smell is either the motor or the belt, if motor hope it is under warranty, if

Brush won't spin. Put it back on the ribbed belt Brush won't spin. Put it back on the ribbed belt what's wrong? Make sure the driving motor (power on) is turning (without the belt attached). Make sure

spinning in reverse. how do i fix the problen? someone changed the belt and didn't put the twist in proper direction The belt on an 8925 should not have any twist. If it has been twisted the brushroll

...belt, and test roller brush to ensure that it spins freely by holding the very end of each side, also called the bearing caps with just your finger tips. Try spinning the brush with your thumbs. The ...