I am unable to remove the blade, what can I do the blade is a screw fit on the shaft of the blender,, if you only use one blade just rince the blade under the tap and dry it off before putting it away
...blades... what could be wrong? any help would be greatly appreciated Check the blade with it off the base and make sure that it spins freely. Check the spindle on the base and see if it feels hard to ...
...blades that seem stuck. Andrea If the problem is that the blades are jammed and you can't turn them manually, you can let it sit ( and dry out ) for a few days, or you can try adding some oil. I had ...
Question about Robot Coupe Blenders
...blades. The motor still runs fine, and the blade will turn, however, the blade is now stuck inside the food processor. As far as prying the blade out, we haven't tried much else. What's the best ...
motor runs but the blade does not spin The shaft has probably siezed at the bottom near the blade. The seal can fail and let liquid inside the shaft and gunge it up. Take the orange handle apart, then
Question about Oster Blenders
...stuck on and the slot of the blade where it sits on the peg had gross black gunk on them, so I'm assuming that was making it stick. So the solution is: Pull and rock that blade off. (1) Yea the base ...
Question about Blenders
blade shaft. If it seems to be stuck or jammed here check what is the causing it to be jamming. In most of the cases it is debris that are stuck in the blades of the blender that causes it to be stuck
Question about Magic Bullet Blenders
How do I remove the nutribullet jar that is stuck to the blade housing? strip the housing to release the blade, it is the only way to go.
blade on MD95 not spinning the motor is working but the blade is not spinning, does anyone know what the problem might be The shaft has probably siezed at the bottom near the blade. The seal can fail ...
The cup and blade are stuck in the machine? Any idea how to get it out? take it apart and so relieve the blade I have never had one and don't even know what one looks like, but almost certainly you ...
1 questions posted
Usually answered in minutes!
33 Questions
11 Questions
8 Questions
5 Questions
3 Questions