Gaggia Platinum Vogue 90800 Espresso Machine "brew unite lube" Questions

...brew unit (lube inside the piece top to bottom. And finally turn the brew unit upside down. There is a rd with a wishbone looking thing in the end of the rod. Lube the rod towards the center of the ...

brew unit, then lube the guides/gear grooves on the brew unit, also lube the o-ring(big red one). Then that should take care of it. You can also try backwashing/degreasing the brew unit if the machine

brew unit. Lube inside top to bottom. (it looks like the end of a smoking pipe) On the bottom of the brew unit there is a rod in the center with a wish bone going through the end. Lube the rod towards

...deluxe makes a weird grinding noise when turn on. sounds like its in slow motion. seems like the brew group is worn out and wont go back into place can this be the problem that it needs a new brew ...

...brew unit in the back. Lube the end of the pipe with food grade not food based lube. We had this problem. The whole piece that the outlet pipe fits into is rubber. We just cleaned with water and then ...

brew draw blocked Ok if brew unit is displayed,the cause is the brew unit needs to be to cleaned of all old grease and coffee grounds. Once cleaned you will need to regrease the big oring at the top ...

...the outlet pipe on the brew unit. It is dragging on the brew unit when you are trying to install it. This will allow it to seat correctly. Use a food grade lube like what came with your

hi thanks for the imfo but just cleaned brew unit and greased all moving parts plus o ring but the machine is still saying brew unit blocked put a peice of card in the microswitch without the brew ...

brew unit missing Hi Open the door on the right. The brew unit is the thing with the handle that has the "press" on it. You need to push on the upper left side of the brew unit until it clicks. There ...

...of the dredge drawer. See if that worked. If it did, then loosen the nut behind the coffee dispenser to release tension on the brew group, then tighten again. Lube the receiver tip on the brew