Carrier XHB123D X/Y Series Heat/Cool Air Conditioner "igniter" Questions

# 11 appears when it trys to start...... not heating Code # 11 indicates an Ignition Failure. According to the Owners Manual you should do the following: Check that gas is turned ON. Check that the ...

Code 11 come out from the led. The heater rinnai 556FTR doesnt work at all. Code no 11 is blinking. Thank you A couple of things can cause a Code 11(Ignition Failure): The gas line at the heater is ...

we have a rheem furnace we replaced the igniter but still getting no spark what else could them problem be the fan works but getting no spark or heat why Is it a true spark igniter or is it a hot ...

...turn power on with thermostat calling for heat. Vent blower should come on first. After a bit igniter should lite up. You should hear click noise of gas valve open up. If igniter does lite and ...

My Amana GUI090B30B furnace will not ignite. The ignitor glows then the valve releases gas but the gas does not ignite. The ignitor goes out and the valve shuts after a second or two of trying to ...

looking for sequence of operation for a lennox mid efficient furnace When there is a Call for heat, the control delays ignition until combustion air Blower operation has been proved and pre-purge ...

heater is on firing up- everything seems ok but there is nogas-goes thru the cycle with igniter glow orange but does not ignite- there doesnt seem to have any gas present to ignite weathermaker 8000 ...

i have a rheem classic quiet 80 . furnace starts up but the igniter will not kick in to start the flame This problem can be one of two things: 1) Bad igniter. 2) Control board not sending 120 volts to

the igniter on my furnace will not shut off, it stays red the whole time Could be the control board. If the igniter is bright red at ignition and then dull red then it's probably OK. The burners ...

my package unit will not ignite the burners. I have a pgbo361001 and the igniter glows but the gas valve does not open, i have 24v going into the gas valve and 24v coming out to the igniter but the ...