...gas to the pilot light while the flame is burning. If flame goes out it shuts gas off to the pilot jet. The thermocouple is bypassed by a switch during the initial ignition and once the thermocouple ...
...gas flowing, if the pilot goes out accidentally the thermocouple won't send any signal and the gas stops flowing. If the thermocouple becomes inoperative, even if the burner is lit, the signal gets ...
...pilot gas. This is very important and I need to know before I can give You options...Lastly I have to tell You never tell a public help engine that You have removed any safety feature from a gas ...
Question about Heating & Cooling
...gas pilot light keeps going out when windy outside I live in a mobile home up on a hill that gets a lot of wind. I've had several furnace men out and everything according to them is fine with the ...
...gas valve because you're auto-pilot stays on long enough for the module to sense the flame and the click is the coil on gas valve being energized.Module shuts MGValve off in a split second to prevent ...
...gas being supplied to the burner, and then igniter firing again. I have changed the filters... Larry You probably have a bad Thermo-couple . It is a copper looking rod that sets in the flame of the ...
Question about Honeywell Heating & Cooling
...pilot gas port. Press the control knob; the pilot should light. Hold the control knob down until the flame is burning brightly (about 30 seconds). Release pressure on the knob, and turn it to the on ...
...gas heater, the pilot light lights, but as soon as I try to lift my finger off the button to ignite the heater, the pilot flame always goes off. Hi and welcome to FixYa, I am Kelly. What you are ...
Gas was disrupted but now fixed. Can't get pilot light restarted? Obviously some other step needed as a result of gas disruption? Please advise? Problem: Your furnace will not ignite the gas to ...
425 questions posted
Usually answered in minutes!
334 Questions
307 Questions
96 Questions
89 Questions
65 Questions
