...plastic door latch catches with no resistance, it is most likely the spring/plastic connector. I removed the door by lifting up, pulling the bottom forward, and lowering. I removed the inside black ...
...door. The plastic clips and the screws together hold this together. Remove the entire door by lifting up and move it to a flat service. If the top vent cover prevents this just remove the two screws ...
...door flat on surface. Plastic trim snaps off with gentle prying (start at bottom middle and bottom hinge side). Then remove six screws holding notched metal section with door latch. This piece will ...
Question about Whirlpool Microwave Ovens
...plastic tabs.To remove the inner door panel you need to carefully pry the plastic frame off the inside with something like a small screwdriver or putty knife. Even being careful you may end up ...
plastic latches on door have no tension. Microwave thinks door is open, because latch is not ingaging. How do I access the latch hardware. with butter knife or small flat head screw driver, carefully ...
...door flat on surface. Plastic trim snaps off with gentle prying (start at bottom middle and bottom hinge side). Then remove six screws holding notched metal section with door latch. This piece will ...
...plastic door will come off. Then the handle will be accessible.The same issue started with my oven too and I replaced the original handle with larger screws and using a high quality plastic glue.This ...
...door? there is a black plastic ring in the inner door, remove it carfully with a butter knife and you will have access to the screws I have the same problem and have removed the plastic ring in the ...
door is plastic covering a metal mesh but the plastic seems to be melting slowly. should I remove the plastic and is it ok for the metal to be uncovered The screen in the door prevents microwaves from
58 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions