Carrier XHD183D Air Conditioner "wall heater ac" Questions

...(rcga) is a 3 ton coil The AC is a 1999 and coil 1998. the # you have for the heater is accually just the honeywell gas valve. the model for the heater would be on the inside wall near the gas

heater and fan work fine. When I turn on the ac the fan blows but the cool does not cool. T Texas It is probably the compressor. You will need to check if the compressor is being called to come on. Do

wall AC/Heater PTC123B50AJ. Heat stopped working, fans all are working, status light is blinking every 5 seconds. breakers are all on. reset on the wall plug has been pushed. still no heat. any ideas?

...wall, fuses and voltage ok. Went into hot attic to check for power up at heater unit, voltage ok. Amber LED light on circuit board says 24 volt circuit supposedly ok. Check voltage at digital ...

Wall AC/Heater for my Florida Room. The unit will run for a short time before it trips the circuit breaker. Any ideas? is the breaker large enough for the unit? this could be the compressor locking up

...ac /heater that is not cooling I have a 17800 btu ac /heater that is not cooling enough. I hear the compressor kick on and the heater works great. The model number is partly removed but I can read ...

What voltage should a wall heater thermocouple generator generate? Usually 24 Volts AC

...wall outlet but the unit seems to have low voltage to it. the fan settings work but when you turn the heater on its tries to heat and the ac will kick on but struggles Before doing anything elese I ...

...wall ac/heater,model # mew12w7e Rev-a.Serial # fr673957 164E.Probably right at 5 years old.If and when the heat does come on it only stays on for a short time. http://www.applianceaid.com/a-c.html ...

...heater wall unit is making a high pitch humming noise during use (cooling). It's not really loud but the unit used to be very quiet. Is there something I can do to stop the noise? hi i have fujistu ...