Question about KitchenAid Kitchen Ranges
...Kitchen aid Superba in 12 years. John. The oven lights get power from the main circuit board. Access the circuit board and check output voltage on board terminals P4-4 to P4-1. No voltage would be a ...
Oven and oven display do not work or light up, but stove top and over light still works Check if there both hot wires and the neutral are ok at the control board. You should have 110-120v between each
electric start gas range When I try to light the rear left and front left burners, they spark but don't light. When I try to light any of the four burners, the back left sparks. What's going on ?!!! ...
...lighting up. The buttons still do their job but don't light up. Is this a Display Board malfunction or the Power Board? a new board is needed . the board cannot be fixed even though it works half ...
indicator is on and all elements are off The hot indicator light will stay on until the burners cool down. If they are cool and the light has not shut off, there is a short in the light or the main ...
maytag gemini mgr6775 oven light turns off and on Originally both oven lights would come on randomly and the button to turn them off would work intermittently. The next day both oven lights were ...
Question about Bosch Kitchen Ranges
All lights on the touch panel are flashing and a continous beeping sound The power went out and went back on during cooking. The range started beeping and all lights on the touch panel are flashing. ...
JENN-AIR SCE30600 COOLING FAN & OVEN LIGHT STAYS ON CLOCK LIGHT WENT OUT #1 ON KEY PAD NOT WORKING. I REPLACED CLOCK ASSEMBLY OK NOW BUT #1 STILL DON'T WORK AND COOLING FAN AN LIGHT STAYS ON ANY HELP ...
After cleaning the oven the F1 light came on. I After cleaning the oven the F1 light came on. I cannot reset the oven nor can I get the light to go out. The cancel button will cause it to go out but ...
Question about Kenmore Kitchen Ranges
'On' light stuck on; located bottom right; can't adjust temp; 'On' light stuck on-can't adjust temp to over 100 degrees the most likely cause for this problem is a faulty control board
7 questions posted
Usually answered in minutes!
40 Questions
24 Questions
13 Questions