Question about GE Dryers
...timer motor itself. A defective timer motor or a defect in the timer's electrical contacts can cause the timer motor to fail and the timer will need to be replaced. The contacts can be checked for ...
timer motor are good and a resistance check of the timer motor reads about 16 ohms. Can anyone provide an assist? Timer resistance is way too low. You may have misswired the new timer. Basically, when
motor starts.timer in any position. will shut off when open door I am assuming that you installed the motor correctly or the motor would not start and run. Most likely, when the motor went bad it also
...timer switch if there are wires hanging off, that is the solution if there is no hum from the timer motor when you push the start button, replace the timer drive motor electronic, not had one break ...
...timer motor on my roper electric dryer to test the timer motor set dryer to a timed dry setting(dryer does not to be running) test for 120 volts ac on the 2 wires to the timer motor,or with dryer ...
timer motor keeps running on dryer dryer works fine, when you open the door you can still hear the timer running sometimes as a timer gets older the timer motor will get a little loud. timer motors ...
...not start. What gives? Saw the motor on the timer does not turn either when the timer has power. Could it be the timer? if any of the cogged teeth on the timer are stripped the timer is indeed at ...
...timer motor itself. A defective timer motor or a defect in the timer's electrical contacts can cause the timer motor to fail and the timer will need to be replaced. The contacts can be checked for ...
...timer motor itself. A defective timer motor or a defect in the timer's electrical contacts can cause the timer motor to fail and the timer will need to be replaced. The contacts can be checked for ...
291 questions posted
Usually answered in minutes!
40 Questions
7 Questions