Peg Perego Pliko P3 - Midnight Blue Standard Stroller "apart plastic stroller wheels" Questions

apart (broke at the plastic center) within 3 months of use (purchased it new). Anyone with information on where to find this replacement wheel, kindly advise. I needed a replacement for the connection

...apart? The steering wheel of the peg perego triplette has several phillips screws that must be removed and also a bolt that goes straight through from top to bottom. The bolt head can be found by ...

...under the plastic area... Looks like the frame would have to be re-welded to function again... Take that area of your wheel apart, and see what is hiding beneath the plastic covering... Good

...apart Generally strollers are a collection of aluminum rods fitted into plastic supports and locked in with aluminum rivets. Wheels are generally fitted to the axel with capped star locks but have ...

apart on it.Thank you for choosing fixya. Hi. The broken plastic part was likely part of the seat itself, please check the diagram below. If the stuck plastic part belongs to the seat you will need to

...plastic part of the wheel. I have tried soaking it in hot soapy water, and used LOTS of WD40. Any ideas? I have tried whacking it, and trying to prise it apart with a clamp but no joy! It is well out ...

apart with a screwdriver. clean the plastic parts, put it back together right and screw it back on. then all you need to do is show granny how to work it (again) to prevent it happening again. You can

...apart with my hands after and to be fair, the fix is probably stronger than the original flimsy bit of plastic. If anyone wants any help on how to fix it (pics or more of a descriptoin of how to get ...

plastic parts apart, I ended up with several loose washers and springs, had to disassemble the other side which worked fine to see how to assemble it again. This exact issue happened on ours. I pulled

...plastic circular piece down with your fingers, as the internal wire is still connected) Now grab some vise grips, lock onto the locking wedge and remove the whole mechanism, also remove the foam ...