Question about Gold Medal Kitchen Appliances - Others
kettle not heating is either a switch, kettle wires, thermostat, or kettle heater. Check that the kettle is plugged in tight, notice if the switch lights up when switched, then contact your local gold
...heating elements because it was more cost effective. Aside from the drive motor not much else can go wrong. In my case it was worth the $200.00 to replace these items instead of $825.00 for a new ...
...kettle will not get hot! The light comes on and the #1 and #3 switch both light up, but no heat!?!?! We disassembled the kettle and noticed that the black wire had been disconnected from the base ...
...kettle is plugged into the cabinet. Then check if switch, (or red power light) lights up when you flipped the switch back and forth. If it does the problem is inside the kettle. Contact a Gold Medal ...
Question about Gold Medal Kitchen Appliances - Others
...light does not completely extinguish when the kettle he's t is turned off Your kettle has had a ground fault, and damaged the switch in the process. Do not Continue to Try and use. Take the kettle to ...
...kettle is plugged into cabinet. Does the Switch light up? if not it is the switch is bad. If it does, than either it is the kettle lead wires, or themostat, or the heat element that is bad. In that ...
...kettle will not heat to pop the kernals The heating element needs to be checked to see if it has power and if it has burned out. To do this, you need a meter that checks voltage and resistance. To ...
...season the kettle, heat it up to operating temp, with a light coating of oil on it. You want to burn the oil, (creating Carbon) to stop new rust from happening. That is the only way to avoid new
...kettle agitator switch (if you have one) and turn off the Pilot light/ heat switch. 7. After the machine has cooled enough so as not to be dangerously hot, wipe the outside of the kettle with a soft ...
Question about Bond Helman Kitchen Appliances - Others
...light+motor work,but will not heat up Did you ever get it to work.. Its either 1 of a few things.. the heating element.. wiring or the thermostat.. youll have to remove the bolts that hold the kettle ...
28 questions posted
Usually answered in minutes!
4 Questions