Question about Keurig Coffee Makers & Espresso Machines
...bulb over the bottom hole for water intake. Squeeze it a few times to get water and air out of the lines. Put it all back together and try the machine again. It should work. I used this on a couple ...
...back on top you will see a nut with a hole in it that the water runs through when you pour it in. Take the bulb off of a turkey baster and put it over the nut after you have put water in the machine ...
...should still be open), and squeeze the bulb to force water into the line. If the pump changes tone, turn the machine off. Remove the bulb and put the tube back into the tank . Try the machine
Question about Keurig Coffee Makers & Espresso Machines
...bulb of a turkey baster over the hole for the water intake. Squeeze it a few times till no more water comes out of the top vent. Put the resevoir back and try the machine. It should work, it has with ...
Question about Keurig Coffee Makers & Espresso Machines
back in place fast and hard. With this way is like it injects just enough pressure into the system to open the check valve and when the motor pump will run you will realize that immediately water
36 questions posted
Usually answered in minutes!
253 Questions
176 Questions
141 Questions
73 Questions
62 Questions