Dirt Devil M085580 Featherlite Plus Upright Vacuum "getting hot" Questions

On a Kirby sentria the metal spool sticking out that goes into hose or power head becomes extremely hot and left burns marks on brush tube. It only gets hot when using power head. I checked all adjust

My Bissell model 1970 won't get hot If you are talking about the water not getting hot, Your Bissell 1970 is not supposed to get hot. It does not have a heater to heat the water.

I have a Kirby Sentria. The post that the belt goes on gets very hot quickly. The roller brush is clean, the new belt is on correctly and the bag is almost empty. try running motor without belt if ...

The region of the motor gets very hot during use. What can I do? The region of the motor gets hot during use. What can I do? It's a Hoover Upright Bagless Model DM4478 001, Type VU01 The Hoover is ...

...that you have good air flow? The HEPA filter is your final exhaust filter and if your motor is getting hot because of poor air flow, it will cause the HEPA filter to get hot as well. Hope this

My shark professional steamer plug gets extremely hot. Is that normal? In minutes upon using my steamer, the cord plug gets extremely hot. We are afraid it will catch on fire or ruin our outlets. no ...

Hoover self-propelled windtunnel U6430-900 flat belt gets hot & becomes hard to push. It has a filter bag. Purchased 8/2/01. Took one plate off bottom. Used a compressor to blow out dirt & ...

...hot to the touch. So, it doesn't work. Any suggestions? Hi, Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head... Euro-Pro Shark Steam Mop ...

I think my maxima got too hot and shut down. Is there a fuse that I may of blown that I can check or is the motor probably fried ? Thanks, Teri The motor has a shut off when it gets too hot. Wait 30 ...

...hot but the water that came out wasn't. Hi, Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... Euro-Pro Shark Steam Mop Problem Here also ...