Nordic Track NordicTrack Powertread 5.5 Treadmill Drive Motor "roller bearing replacement" Questions

...the roller. The motor was replaced 2 months ago. Is this the bearing? Hello, Yes you have a bad bearing. The bearings are not replacable on the rollers. You will need to replace the whole roller. ...

The rear roller appears to be making noise as if bearings are going bad. Is there anything to replace or grease????? Pretty much the bearings have flatten if you are getting a clunking sound these are

...roller may have a bad bearing. The bearings themselves are not replacable. The entire roller must be replaced. You can find the parts lited on iconservice.com and enter EPTL09706 in the model number ...

roller and taking it down to any bearing shop and have them locate the bearing numbers. Ask them for advise on removing them as well. If the noise is coming from the front of the treadmill then have a

...but the noise is deafening. The machine operates well except for this noise. LUBE the deck belt + rollers bearings .However test the rollers bearing main motor. If the problem persist time to ...

...roller are shot. Are replacement rollers for this model available? Please provide details. In looking at the parts list for the Precor 9.20s on fitnessrepairparts.com it looks the rear roller for the ...

...what do you think. The sound is almost like a grinding, like there was a piece of something in it. I have removed the cover and there is nothing there. The roller bearing went bad, replace the ...

rear roller makes noise most likely the bearings are going bad.try loosing the walking belt and rotate the roller by hand. if you feel any grinding or its not smooth it shoud be replaced. normally ...

...roller see the video attached, lube the rollers bearing front +and back too. test the drive belt motor, replace the belt if necessary. If the problem persist, replace the old board deck belt. God ...

...replacement of the bearings, yes it is possible but a very difficult process especially for the Front roller due to the Pulley that is pressed on there. If you need any Technical Support you can ...