...chain for fan speed control comes through the glass light globe at such an angle that the fan can not be changed to different speeds is there a fix for this problem Never heard of that, usually the ...
...angle too acute and the chain hangs up on the cover and will not operate. Take the glass off and see if there is a hole in a small plate below the light sockets. The pull chain should go thru this ...
...angle of the blades. The second is the height of the blades. Locate any that are misaligned with the others and mark them with a piece of tape. To realign a blade find a hand hold on the body of the ...
...angle to operate. With the light installed the problem worsens as the chain is threaded back to the middle of the unit to fit through the bottom of the light fixture. Even with this crappy design the ...
...chain that controls the fan speed starts above the light, goes through the light kit, and comes out through the plate that holds the globe on. Both chains are extremely difficult to pull and they get ...
...chain is always sticking because of the angle it has to take--even when I line it up as straight as possible. Any suggestions? Sorry to read about your problem, I hope this helps you out. Either you ...
3 questions posted
Usually answered in minutes!
437 Questions
165 Questions
157 Questions
101 Questions