Boss IQ 3KD.1 Car Audio Amplifier "board" Questions

Behringer inboard effects modul board The effects module board in my PMH 1000 is busted. Where can I buy a new board. The model states DF0482 BEFORE you throw away the board, I found a similar board ...

Diamond Audio D5 1200.1 wont power up I received a Diamond Audio board, D5 1200.1 board. It was missing some surface mount transistors, and might be missing some other parts, I am not sure. I have ...

questions about driver board hello, i would like to know what type of IC are used on the driver board (2 pices with 8 pins each, smd). it seems that the same driver board its used in the following ...

...hit or bumped too hard it can break the connection where the jack is soldered to the main circuit board. If you can see the underside (solder side) of board with the bottem plate off, it may be a ...

i have an alpine mrv=t303..there is output,,where the rca's wire to circuit board ,,but it makes a buzzing noise like its not grounding on the board.nothing is burnt up on the board and thr rca inputs

bxi 2006 audio driver board need to replace bxi 2006 audio driver board need to replace If the output transistors are not shorted, he's probably correct in suspecting the driver board but it can ...

...and a brand new tooth brush. Very carefully and slowly pour alcohol on the processor circuit board. Now dip the tooth brush into the alcohol and brush the circuit board. Then blow the circuit ...

...power to the bxi2006 was used and it worked perfectly.what i did was to interchange the protection boards and the result revealed the protection board as the problem .my problem is all the parts on ...

...light is vey dimm all the current wires are connected cand this be because of the amplifier boot board and where do i get a replacement board the mosfets checked good its a great amp I need help ...

I need to know how to remove the circuit board out of an Alpine MRD-605 amplifier. I need to solder the RCA plugs because they have become loose on the board. Please help. I get it to almost come out ...