but cant get the detergent to flow. If you are referring to an electric washer,The wand for the detergent is a double action wand. You usually pull the wand end out for low pressure and detergent flow
...I connect the wand and pull the trigger, nothing. I have replaced the wand and that was not the problem. Please help. check the quick disconnect to the wand these are spring operated and can get ...
...pull the wand handle back - I get a high release of pressure - I can hold the wand open and start the engine and it will run until I close the wand - egnine stops Take a look at this link, I think ...
Question about Garden
160; Remove the high pressure tip and either try another tip or pull the trigger without a tip on the wand to see if you have the same problem. If available, try another pressure gun on the hose
...wand is attached I hook up the hose, let water run, pull the trigger and water shoots out, motors kicks on - everything is fine. Attach the "high pressure wand " to the "gun" and it barely shoots ...
Question about Campbell Hausfeld Garden
...pull start cord unless wand trigger is depressed. if I release wand trigger while pressure washer is running the engine stalls & shuts off common for not starting unless trigger engaged as you are ...
...wand to adjust the width of the spray pattern...You can also push it out or pull it in from hi to low pressure....You need to pull it to low pressure so that it draws chemical through your chem ...
Question about Garden
Engine is running faster than normal & causing spray to come the wand without pulling trigger? Trigger for wand needs replacing, water bypassing it and not allowing pressure build up enough to close ...
pull trigger, no water from wand this is the second pressure washer we've bought from costco doing the same thing. you can tap on top of wand and sometimes it works The wand is plugged.
Question about Garden
pull the trigger on wand to release pressure so the engine can turn freely. It has so much pressure at wand that it will not let you turn enging over. If not It may have froze up. Check the oil first
1 questions posted
Usually answered in minutes!
685 Questions
273 Questions
123 Questions
72 Questions
36 Questions