...instructions Sunbeam steam valet How to fill your Sunbeam Steam Valet Here is how you fill your Steam Valet. Press the small button on the back of the handle and pull bottom of handle apart from the ...
instructions on line Try a solution of 1 tsp. white vinegar and fill the reservoir the rest of the way with water. Turn the iron on just until it heats up to high temperature and then turn it off. Let
...instructions . How do you de calc it ? Thank you . Claire Fill tank with water and put steam setting to 0.Set temp pial to hottest setting. Let the iron heat up till the light in the hand goes ...
...instructions on the bottle. Using distilled water in the iron will eliminate or reduce the need to de-scale the iron. Fill it , turn it to max heat hold it over a sink and press the steam button ...
...fill the iron with softened water. Instead, use filtered or distilled water.2) if the iron does not heat a( test the power cord for open or defective b) and thermostat for adjust c) test the thermal ...
Water drips out of steam holes I followed the manufacturers instructions in filling the iron and letting it heat up and produce steam. The tank was not overfilled. The controls were set to high steam ...
Question about Euro-Pro Irons
...instructions for our iron. Would someone upload the instruction manual? Thank you SO much. SELF CLEANINGIt is important to ?Self Clean? the iron at least every two weeksto remove scale, calcium, etc. ...
...a hardware store that is used to decalcify the iron. You fill the tank with the solution and let it pass through the iron to remove calcium deposits. Instructions will be provided with the
289 questions posted
Usually answered in minutes!
68 Questions
1 Questions
15 Questions
17 Questions
