Husqvarna Model 460 Rancher Chainsaw 60cc with 24 Bar and Chain "releasing chain brake saw" Questions

Chain brake jammed on Echo CS400 chainsaw I just purchased a new Echo CS-400 chain saw. Prior to shipping the saw, the shipper removed the bar and chain. Apparently while removing the bar, they jammed

...chain brake Installed new chain blade on Husqvaran 51 and forgot to release chain brake. Can't put back cover because the brake tension won't allow it to fit over brake You'll have to release the ...

husqvarna 460 rancher saw- chain brake is tripped and locked; cannot replace cover How do I reset the chain brake? Pull back on the chain brake, this will release it.

...releasing the chain brake. Check by seeing if the chain will slide in the bar. - If it won't release, I would remove the bar, clean all the parts with solvent and air, and then re-assemble it, making ...

chain brake should have been released before removing the cover. You will have to release it with a large flat-blade screwdriver in the connector that runs the brake from the control handle. Hope this

...chain brake is engaged or the chain is too tight. Start by pulling back on the chain brake toward you. There should be a "click" if the brake was released. If the chain is still immovable, try ...

brake is on. There is a safety bar which will be pushed forward in the event that the saw kicks back, engaging a brake which stops the chain. Pull the bar toward you, releasing the brake and try again

...releasing 14inch ryobi saw First try cleaning it. Begin by removing the spark plug wire. Then remove the housing and inspect the chain break for broken chain brake parts such as the spring. If all ...

...chain brake is released and that the chain adjustment screw is backed out a few turns. Make sure that the adjustment tang drops into one of the large holes and attempt to install the cover. If the ...

...CHAIN DOES NOT MOVE, AND SMOKE COMES FROM UNDER SIDE COVER....NOTE...SON-IN- LAW REMOVED SIDE COVER WITHOUT PULLING BACK BRAKE HANDLE.....BRAKE IS PROBABLY STILL ENGAGED......HOW CAN I GET BRAKE TO ...