Simplicity 7250 Deluxe Vacuum "series 6" Questions

...(2 latches at the top of each lens). Once you have removed lenses you will see screws (4 or 6 - depending on the e-series model). Remove them and you will have the access to the filter. Good ...

what is era 6 and how do you solve it this link is for the manualhttp://www.robotshop.com/PDF/roomba-500-series-users-manual.pdf

...series vacuum's carpet attachment'a beater bar doesn't work if the height adjustment is not at the highest and doesn't pick up great. Replace the belt if it's over 6 months old. Belts lose elasticity ...

...series: ZC12.0 quit today (1/6/2008) I was vacuuming a light job on carpet and they just quit working. The motors on both did the same thing. They just stopped turning. I checked to see if there was ...

I have the new power on/off switch to replace the old one(Rainbow vacuum). However the new switch has 4 contacts & the old one has 6. Need wiring diagram. Simply pair 1 each of the power head ...

...series 6 and we are not getting any power. We tried different plugs, changed bag, etc. but still no power. Is there a reset button anywhere? Any other suggestions? Thank you for any assistance! check ...

6 series vacuum. the bag overfilled and vacuum will not run. No power. is there a fuse of relay inside the unit? no just on /off switch and direct power to vac motor sounds like its burned up from bag

...Series. I changed the one filter located on the blow side of the canister. It is a little different than the one I removed. It has a black plastic thing that is in the middle so that when I put it ...

Rainbow SE (1991) 1. Impeller assembly: There are 3 aluminum impeller disk assemblies. In what order are they assembled on the shaft? In what order are the spacers installed? 2. Who sells a power ...

series vacuum cleaner suddenly does not operate efficiently. no longer picks up pet hair like it always did before. the brush has been cleaned and rotates perfectly. can you help us? thank you, George