Ultrex 834-334 Die Cast Work Top Blender "causes blenders stop working" Questions

blender problem Blender work for a while and then the completely stopped. Is there a fuse on this blender? Yes there is, however unless you are very mechinal incline I won't suggest that you try to ...

...causes the blender to automatically shut off? It will overspeed about 3 seconds before it stops working and all the lights start flashing. there is a voltage regulator inside the circuit board , this ...

the blades stopped turning in the middle of blending a batch of hummus Its is a Kitchen Aid blender about 10 years old Does the motor still work if you take the pitcher off of the base? If so, the rod

Cuisinart Quick Prep is not working properly the Cuisinart Quick Prep is not blending - the blade turns, motor runs, but the velocity is not producing ''blender like'' results. It just started. When ...

Krups blender blade stops I have a Krups Power Xtreme VI blender that refuses to blend. While making a daquiri one night my sister noticed a burnt rubber smell so she unplugged the blender and took ...

I can no longer unscrew the plastic part that the glass container fits into on my old Waring 18BL28 blender. It is a simple 10 speed that works perfectly. Something sticky is in the threads... Try ...

...working, and not for those that aren't, you probably have the same problem. I discovered that there is a tiny mechanical push button switch under each button. The switches are held snug to the bottom ...

...causes fluctuation in the supply and the device starts malfunctioning. If the power is Ok, then you need to check for the working of the Button and the electrical motor. There is a possibility that ...

was blending this morning and all the sudden the blade stopped spinning. all of the lights work, and I've tried putting it on "pulse" mode, but nothing can get it spinning again. any ideas? ...

plugged 120V appliance into 220V socket I plugged my Nutribullet of 120V into a Hong Kong socket of 220V. It worked for a split second and then a puff of smoke and burnt metal smell came out and ...