Pitco Solstice 2-SG14 S/FDFryer Gas "thermocouple replacement fryer" Questions

...gas deep fryer m# SR142GN heats up to temp then whole thing shutts off have to wait about three minutes to turn pilot back on Thermocouple is getting weak. Replace the thermocouple with a new

...fryer has a thermopile not a thermocouple. There is a big difference. Thermopiles come in 2 different syles....2 wire leads and coaxial (small copper tube with a fitting on the end). All of the ...

...goes out any ideas The coil in the valve is barely being held closed. Most of the time, 90%+, the thermocoupler (or thermopile) is bad. You can clean and check the connections, and test it again. ...

pilot will not stay lit. Will light and goes out after a few minutes! Remove the thermocouple and clean the threaded end carefully. Then screw it back in and try it. If it continues to ...

...replace to do the conversion? Make sure all your wire connections are correct (hi-limit/thermostat/thermocouple connections).I repair these fryers if you need more advise let me know. hi, my wire ...

...valve on for pilot light first and the burner light. So either the pilot light is not reaching the thermocouple - this only if someone moves the pilot light Or the thermocouple became weak and can ...

Pilot light won't stay lit The pilot light wouldn't light. I replaced the thermocouple, now I can get the pilot to light, the pilot/heat will start, then after 10 minutes or so, I have no flame or ...

...to hold down on the pilot knob on the gas valve for a couple of minutes after you light the pilot. Thermocouples get weaker with age. If this does not do the trick then replace the thermocouple or ...

we replaced the gas valve on the imperial fryer, now the pilot light will not stay lit on the fryer. If it has a thermocouple you should check it next.

...is faulty, it will turn off as soon as you release the igniter button. Replacing thermocouple is an easy repair. Call the number listed on the owners documentation to get the replacement