Directed 600D Car Audio Amplifier "subs amp" Questions

subs and audiobahn amp what kind of amp do i need for 2 12 subs by audiobahn want a audiobahn amp First thing is first. What subs do you have? Audiobahn makes several kinds of 12" subs. What model sub

...amp which would be both wires from sub both + together and both - wired bridge on the amp will make it a 1 ohm to the amp. Please post what ohm your subs are and i can tell you alittle more about ...

subs and amp? if your subs are more wattage than your amp, your amp will blow fuses as cant handle the output to your subs. for example. you have 2 500 watt subs and a 300 watt amp, that is no good as

...amp using these subs will limit you to a 4 oh load to the amp witch will only let the amp produce half of it's power. the lowest ohm load that amp can handle is 2 ohm and the next lowest you can wire ...

...next sub; then negative on sub to negative on amp) Note though, with two dual voice coil subs, you can have a 1 ohm load with the first set up, which can damage your amp. Let me know if this helps

...subs to the amp the protect light comes on but the amp works fine when subs are not bridged is the amp able to handle two 4ohm subs bridged? Thanks Are you setting the bridge switch for both left and ...

...some amp you can use amp as 3 way if one or two subs, bridging output will give you more power for the sub. be aware that bridging 2x4ohm subs will give you 2 ohms and potentially damage the

...amp itself, or the subs/sub wiring. If no, the problem is the head unit--probably an internal short. If the other amp works with the sub amp disconnected, reconnect the sub amp to the head unit, but ...

...amp once any power hit the subs. We went through about 7-8 fuses rewiring, bridging the subs etc, finally we tried another Sub, a 12" sony sub and it wouldn't blow any fuses but there wouldn't be any ...

amp to the subs as well as how the subs are wired since they are dual voice coil subs you bridge the inside + - and use the outside + - then connect the outside + to the amp then connect the - to the