Hvac Direct Gas Furnace Gmh80704bna 80% 70k Btu Upflow "lighting burners" Questions

gas furnace, main burner ignites the other 2 don't. then shutdn. Rheem/Ruud Silhouette II gas furnace UGPH07EAUER. HSI (ignitor) lights up at main burner head. Gas flows and is ignited at main burner ...

I have a HE20 Insta Flame propane fireplace. I can light the pilot light but I can't get the burners to turn on. It has a wall switch that is suppose to turn the burners on. Any suggestuions? Try ...

my goodman furnace (model gmp 108-3) is not working. If I turn off the unit and turn it back on the fan comes on and the little filament heats up, then the top burner will light, but it will not stay ...

All burners will not light on Goodman furnace I have a Goodman GMNT060-3 about 6 years old. All 3 burners will eventually light but only after having the furnace cycled multiple times. On occasion, it

Rheem gas furnace pilot lights, but no burners or fan Electric ignition gas pilot works, burners light faintly, but not fully, then die out. Pilot stays lit until I turn off thermostat. Last week, the

burners go out Need more info. time how long burners stay on> watch them when thy light. ther is a sensor in front of one burner. it senses the flame. if that burner takes to long to light the ...

Inducer motor starts, electrode glows, get 24 volts at gas soloenoid but only only the first burner lights and the other 3 do not. Sometimes all 4 will light but usually just the first one. Then the ...

heater is not igniting see this causes and fix it. God bless youf there is no heat, check the electrical service panel  for a burned fuse or tripped breaker. Relight the pilot light (see below). ...

the burner on my carrier 58MCB starts for a few seconds and then stops. I need help in locating the flame sensor to see if it needs cleaning The flame sensor is located in the burner section and is ...

indicator light always on The indicator light is always on. The two electric burners, the grill, and the fan seem to operate normally and I found no loose wiring inside the area where the switches are