why depth flashing No depth reading or depth beyond setting of range. Also check connection of head to transducer
...not get a reading and see the flashing depth. You should hear and feel the clicking in the transducer when out of the water and working properly. Are you getting a temp reading when out of the
Depth flashing Unit flashes depth reading (I swear it is deeper than 2.2 feet!! it was more like 900) while drifting and while running at different speeds, does not always do it but when it does start
...depth reading on the Garmin be flashing "0.0"? possibly.most ive owned will flash random numbers when out of the water.the fact its flashing or reading numbers at all,means its working.youll have put ...
...reading the depth. I'll probably send the guage in to FARIA - they'll repair it for $55. You bring up a good point - maybe the transducer is bad? I put a call in to the Tedmeister to see what he ...
depth may be correct but flashing and sometime stall. When running it doesnt read correctly if at all. I have reset to factory settings and problem not fixed. Any ideas??? need to check what they call
...depth (flashing or not) in the top left corner. If the problem still occurs, make sure the transducer is clean and still mounted so that it is sending the signal straight down to the bottom. If the ...
unable to track the bottom i have a 3210 garmin chartplotter with a gsd 22 sounder module, reads depth fine when moving but depth window flashes on and off when in 30 or so feet of water, whats wrong ...
...depth reading and starts flashing weird numbers, it does it more than what it actually works correctly. also is there some kind of video that you can watch, that actually shows a professional setting ...
depth reading on the rear unit starts flashing, when you start to plain out. Rough water causes the same problem. Unit will also shut itself off. I have been dealing with this issue for several months
23 questions posted
Usually answered in minutes!
14 Questions