Earthquake Sound PH-D2 Car Audio Amplifier "sony xplod 1000w amp sub" Questions

...xplod amp in bridge connection the amp in bridge is 400w x 1 max to 1000w x 1 while the subs in series becomes 760w maximum to 2600w,, what will happen in the long run? 2nd problem: 2 units 380w ...

...sony xplod amp? Ok i have a 15in 1000w punch rockford fosgate sub hooked to my 1000w sony xplod. i wired it to 1ohm and it keptover heating and turning the led red. so i turned the gane down this ...

...xplod subwoofer 380 rated power,. maximum to 1300w. while the xm-1652z in bridge connection is 400w x 1 maximum to 1000w x 1.... does a 380w sub can be connected to 400watts x 1chanel ammplifier? pls ...

...sony xm-1652z 1000w amp run 2 dvc 4 ohm 800 watt rms subs?and whats yhe best wiring option if so?thx IT WILL POWER THE SUBS WITH NO PROBLEM. I WILL NEED TO KNOW WHAT THAT MAX WATT THE SPEAKERS CAN ...

Sony Xplod Amplifier Problem im having nearly the same problem with my sony xplods. i just got a 1000w sony xplod amp, hooked it up n everything and it was working golden for about a month until i was

xplod 1000w amp,with a single kicker cvt 12, and at low, very low volume you hear a low sound of distortion, this a new sub, and the old did not do this, at high volumes,the noise goes away and sounds

...sony xplod 1000w amp the amp gose into protect mode when you turn it up it just stop playing yes once in protect the amplifier is cut off because the current drain is more and can damage the outputs. ...

sony xplode 1000w amp has green light puts out no power to subs i hooked up my subs as i was told to and as the directions say and they don't work i have power to the amp and the light is green but ...

...sony amp model # 1652z and 2 kenwood W's subs.1000w read acroos of it but what is the RMS?? Root Mean Square You can read about it here as well as the formulas you need ...

...sony 1000w xplod amp. I have tried multiple connections and bridging and power isnt getting to my subs. I REM from my amp to m,y radio and have a secure ground for the amp. Any advice for how to get ...