Earthquake Sound IW-803 Main / Stereo Speaker "causes low volume amp" Questions

...volume is extremely low on that side. Its most likely the balance or fader that is causing the volume difference. set both of them to the mid setting ( usually straight up on a round dial) and check ...

...especially as these hold a charge when the power is off. They could be connected with the power supply of the audio power amp, or in the output stages, which would explain the low volume

volume.... many amplifiers protect against a short and against an open. They are looking for speaker resistance within limits. Your wire to the speaker may be too long or too thin. You may have hooked

...volume reduces to v low level) even when driven by 500W amp. Doesn't seem to be the amp but not sure if the speaker has it's own internal protection. Can anyone advise? Poly Switch All full-range ...

...low volumes to see if you hear any sound at all. Next, remove one of the wires and using a 9Volt battery quickly touch the 2 leads on the tweeter. If you don't hear a click, the tweeter needs to ...

low end sounds (causing vibration) audio. This is one of a few I have, and this is the only one with this problem. Any suggestions would be great. Thanks! hi there... i have same problem and i believe

...volume very low, it works okay. It's not the cable, I tested this thoroughly. I like fixing things and have fixed a few speakers/amps before, but never a subwoofer. What could be wrong? sub woofers ...

...low volume. Recently, I turned on my speakers (BX5) and only the R came on. L was dead and inspection revealed it was "blown". Can't imagine why/how. We just replaced that set with new pair ...

...volume knob on front I can hear the signal for a sec then static. It looks like the r57 and r52 mite be blown cause theres a little brown discoloration on the backside of the PCB. Fuse is new and the ...

...Low Frequencies. >>>> Be advised that this way of testing has NO VOLUME CONTROL because amps without volume controls always operate at maximum gain, relying on your external controls to ...