Reddy HEATER RH125T 125,000-BTU PROFESSIONAL SERIES PREMIUM PORTABLE KEROSENE FORCED AIR HEATER W/TH... "combustion chamber" Questions

...combustion chamber, the glass is oval, follow the long axis of the oval toward the 'top' of the ignition chamber (my unit is laying down, with the blower on the west end and the combustion chamber on ...

combustion chamber and the heater is running fine, then the reset trips. Is this correct? If so, chances are the Safety Control (reset) is defective. Part number HA3003. The photocell could also be at

...combustion burn chamber air temperature, when it circulates through the blower assembly? The ribbon gaskets show leakage , and my best guess is, a suitable temperature sealant in addition to the ...

...combustion chamber with fumes present. The soot means the gas, or fuel to air mixture is incorrect. The inlet of the burner should have an adjustment that slides. That is an air coke . It may be ...

...combustion chamber along the sides (round cylinder) kero enters on the burner mat where it ignites. the solenoid pump keeps adding kero until the flame detector spots or heats up. air flow to the pot ...

combustion chamber. I have replaced the exterior filter, cleaned the screen, disconnected the fuel line from the combustion chamber, disassembled the fuel pump to sure the plunger moves, and still get

...combustion chamber the combustion fan motor is either inside the flue pipe or out side of it not sure on the one you have but you should see two plastic tubes that connect to a barb onto the topside ...

...combustion chamber to other space - ideally outside. In a fireplace, an obstruction could be the damper. In other heating sources that use combustion for a heat source, the flue may become a home for ...

...combustion chamber for cob webs or debris. You can access the chamber by carefully pulling the flame rod and electrode out from the front port. Be careful with the fiber gasket. Blow some air in the ...

Combustion Chamber hot air oil furnace I have hot air oil furnace made by Olsen/Airco model BCL-120S. It appears that the combustion chamber (fire box) is on its ?last leg?. Is there any way to take ...