Question about Minn Kota Boating
...TROLLING MOTOR IS A MINN KOTA MAXXUM FOOT CONTROLED 74 LB THRUST Hi! Here's a schematic: Max 74 Bowmount Make sure the end housing #7has a small mark in it pointed to the bottom (towards the skeg). ...
55ap speed wont slow down ordered new foot pedal and still wont change speeds any idea what could be wrong Probably in the control board in the foot pedal unit.
Question about Minn Kota Boating
trolling motor that was hooked up pos. to neg./neg. to pos. now it wont' work at all. Can't find a fuse or breaker.....Any solutions out there???? Unfortunately, those units have a circut board at the
trolling motor. However, it does not look possible - at least in managing the transducer wire.. Any thoughts? Did the unit come with a strap to mount the transducer to a bow mount electric? Most units
...trolling motor. there is a plastic nut and a screw in the center of it. they both just turn. ive used a screw driver to turn the screw and pliers to hold the nut. it looks simple but wont loosen. i ...
Question about Boating
...wont turn prop till after 25% power Magnetic friction and resistance can cause a requirement for increased power to start the prop moving. The numbers on the tiller handle are for reference and are ...
Question about Minn Kota Boating
my 40lb power drive v2 wont let the prop turn.i bought a new controler. it turns fine but wont turn prop. makes clicking sound in head. can you turn prop by hand if not motor locked up
...trolling motor and the same problem. It seems the factory grease gets hard inside the motor where the shaft spins and acts like glue. I removed the long screws, carefully pulled the case apart, ...
...trolling motor died . It was on the new boat that I bought in 2011 . Checked the breaker fuse and it's good, tested the wiring with a volt meter couldn't find anything. Could it be the micro switch? ...
131 questions posted
Usually answered in minutes!