...trolling motor prop I'm wondering if there is more than one size of hubs for motorguides trolling motors Motor Guide hubs come in two different sizes - 3" and 3.5". The 3" size is more for older and ...
when troll motor is switch to mom and pedal engaged motor does not run, but when switched to con it runs in this mode. this problem just started, replaced switch and problem still the same. I'd be
Question about Minn Kota Boating
...trolling motor not getting power My wife got her fishing line tangled in the trolling motor. I took off the prop and removed all line. Now the motor is not getting power. I am not sure if these are ...
...trolling motor apart. I had an issue getting the brushes back on but figured that out. A couple of the wires came undone and i plugged them back before closing the motor up. Now the trolling motor ...
...trolling motor mounted transducer. The problem is sometime it works fine then the screen shows lines up and down the depth will go from 10ft to 100+ ft in 10 foot of water. And the tempature always ...
no forward thrust -- can hear a clicking noise in unit when stepping on foot pedal. Usually this is due to a power problem. More times than not I have seen this problem and it seems to always point to
hard foot pedal I have a Minkota all terain 40 lb thrust. My foot pedal has progressively gotten stiffer and now it very hard to push down. what's wrong and what can i do to fix it? On the base of the
I have the vantage on the back of my 18' Aluma craft pro about eight' 2" wide. the unit is not new as I bought every thing used-the Minn. has run nicely @ times however I have blown three 40amp ...
my minn kota riptide 55 stopped working when i turn the handle. i believe its a connection issue. i dismantled the housing around the handle and a little metal washer fell out broke in half and the ...
131 questions posted
Usually answered in minutes!
