Question about Empire Heating & Cooling
...EMPIRE MODEL 70775 FLOOR FURNACE 65.000 BTU. GOT THE PILOT TO LIGHT WHEN TURN ON THERMASTAT TO TURN ON HEAT IT KNOCKS THE PILOT LIGHT OUT. HAVE CLEANED EVERY PART IN FURNACE. I would suspect the gas ...
Question about Empire Heating & Cooling
model 3572 empire floor furnace pilot goes out when turn valve to on furnace will not light Clean pilot could be blocked or its the thermocouple needs replacing
...pilot light empire wall heater with wall vent - pilot light turns on, burner starts but turns off after about 30seconds - flickers first and then turns off. It sounds like the gas valve is dropping ...
...turn your Wall Thermostat down to the lowest temperature setting before turning the knob from Pilot to ON. FYI - That Wall Furnace does not have a Thermocouple. It uses a Thermopile instead to ...
empire wall heater, pilot is on but when you turn up the temosrat it wont come on, have you check the switch if it is break ?or maybe it has used for a long time .it was out of work .and couldn&
...Empire DV-210-6sg, the pilot lights and I can turn on the unit, but it will not sense the themostat to heat the room. themostat tested fine. what is wrong There is another sensor called a thermopile ...
Question about Empire Heating & Cooling
...pilot light will light & will stay lit but when you turn up the thermostat the main burner does not come on lightly tap on the area where the wires are connected. the valve will stick at times. ...
cant keep pilot light to stay on i hold button down and after a few mins try to turn to keep pilot light on and it just goes out :( Sounds like the thermocouple is is weak and needs to be replaced
142 questions posted
Usually answered in minutes!
354 Questions
282 Questions
85 Questions
73 Questions
62 Questions