...and then separate ( look were the clear plastic meets the colored top you might see a little picture of a lock and a open lock turn the lid towards the unlocked position , the filter should be in ...
...little button on the top side of the hose area you depress to remove the attachment. If you're still having difficulty, you may want to contact us for additional assistance. Here's a quick link to ...
...thread in the bobbin case...wat to do?? Tighten the bottom thread or loosen the top thread a little. There should be a little screw on the bobbin holder where you can adjust bottom thread tension. ...
top of the base.there will be a little flapper door there when yo take it off.open the door and take a coat hanger with the end bent over like a hook and pull the dirt clog out of there.but first take
...top of the vacuum cleaner gets very! hot with little use of hand wand. it is a majestic model with chrome top about 6 years old the exhaust is from the top so it will normally get pretty hot. If the ...
...two screws on the top of the hood, usually hidden amongst the four little holes on either side of the top of the hood. This should allow you to lift the hood away and access the belt and brushroll. ...
...little phillip screws either on the top or flip it over ond right ther by the wheels you will find the screws usally 3, remove the top pull out the brush and replace your belt always remember to put ...
Question about Kenmore Vacuums
top cover off the powermate to replace the belt. If you remove the headlight cover you will find two screws that need to be removed, than flip the power nozzle over and you will find a little catch on
...clogged. but nevertheless, that is alway a must, to prime the machine by placing the tip of that squueze ball over the little nozzle tip thats on top of the unit (which is under the tank itself).
1 questions posted
Usually answered in minutes!
8 Questions
3 Questions
4 Questions
2 Questions
0 Questions
