Bissell ReadyClean PowerBrush Deep Cleaner "lift problems" Questions

female plug as well. How do I replace these plugs? How do I get to them? I had same problem with my lift-off, i sent email to Bissell explaining what the problem was and where to get replacement parts

or wand when I press the release button. . We had the same problem.... we had to push both wand and lift way buttons together to make the wand release. I think it is a faulty button issue

DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not jammed

...no problem by hand? If belts are ok then possibly needs new front brush motor replaced. remove the lift off and assure the plugs are clear.. reseat... no dice. then motor... common issue is just not ...

The vaccum continues to shut down and Shark troubleshoot suggest the thermastat. Instructions followed but problem persists. Operates for <5 min at a time and there is an burning odour coming from the

No suction on the bissell lift-off revolution I have replaced all the filters & the vacuum gets plenty of suction until the canister is locked into postion, then the filter indicator changes to red & ...

Bissell Lift-Off Turbo power outage My Bissell Lift-Off Turbo Upright has started to turn off in the middle of vacuuming. There are no smells of anything burning, but after about 15 minutes to power ...

...lift off revolution turbo just lost its suction? i just need an answer maybe on how i can fix the suction. Well if i also might mention... is it normal to blow out hot air ? maybe well if that is a ...

...need to change the belt. Here is a link to the belt you need and to a manual you can view: Bissell Lift-Off Revolution Belts and ...

need on off switch for shark navigator lift away Can we get an on off switch for a shark navigator lift away? I called cust. service, on and off switch not working. They sent me a new machine. The ...